Comm. module DSE M-Bus to LoRa LoRaWAN
DS Energy gateway for connecting Wired M-Bus devices to a LoRaWAN network.
The gateway supports up to five M-Bus devices and forwards meter data via LoRaWAN for remote monitoring and data collection.
- Wired M-Bus compatible
- Up to 5 connected devices
- EU868 or US915 LoRaWAN
- 5 min to 24 h transmission interval
- DIN rail mounting
Wired M-Bus to LoRaWAN gateway for remote meter reading
The DSE Wired M-Bus to LoRa LoRaWAN is a DS Energy gateway designed to connect Wired M-Bus devices to a LoRaWAN network. It receives data from compatible Wired M-Bus devices and forwards the relevant information via LoRaWAN to a LoRaWAN gateway, which can then transmit the data to the appropriate server or backend system.
The solution is particularly suitable for remote reading of electricity meters, water meters, gas meters and other energy meters with a Wired M-Bus interface. Other Wired M-Bus products, including industrial PLCs, can also be connected for remote reading or configuration. Data can be accessed through DS Energy's backend. :contentReference[oaicite:0]{index=0}
Wired M-Bus to LoRaWAN communication
The gateway supports standard Wired M-Bus communication and can connect up to five M-Bus devices. On the wireless side, the device communicates over LoRaWAN and is available for either EU868 or US915 operation.
Configuration can be received through LoRaWAN downlink, allowing the connected installation to be managed remotely. The transmission interval can be configured from 5 minutes up to 24 hours depending on the required reporting frequency.
The gateway is designed for DIN rail installation and can be powered by either 24 VDC or 230 VAC. It uses separate power terminals, and 230 VAC must not be applied to the 24 VDC terminals.
Product benefits
- Connects Wired M-Bus devices to LoRaWAN
- Supports up to 5 Wired M-Bus devices
- Suitable for electricity, water, gas and energy meters
- Can also be used with compatible industrial PLCs
- EU868 or US915 LoRaWAN communication
- Remote configuration through LoRaWAN downlink
- Configurable transmission interval from 5 minutes to 24 hours
- DIN rail installation
- 24 VDC or 230 VAC supply options
Technical specifications
| Product | DSE Wired M-Bus to LoRa LoRaWAN |
|---|---|
| Manufacturer | DS Energy |
| Function | Wired M-Bus to LoRaWAN gateway |
| M-Bus | Wired M-Bus compatible |
| Supported M-Bus devices | Maximum 5 units |
| M-Bus connection | +, - |
| LoRaWAN frequency | EU 868 MHz ISM or US 915 MHz ISM |
| LoRaWAN antenna | SMA-RP Female, fixed antenna or extension cable to external antenna |
| Transmission interval | 5 minutes to 24 hours |
| Configuration | Remote configuration via LoRaWAN downlink |
| Supply voltage | 24 VDC or 230 VAC |
| Dimensions | 36 × 83 × 90 mm |
| Width | 2 DIN modules |
| Mounting | DIN rail |
| Protection rating | IP20 |
| Case material | ABS plastic |
| Terminal type | 5 mm spring terminals |
| Wire size | Up to 1.5 mm² |
| Operating temperature | -20 to +60 °C |
| Storage temperature | -40 to +85 °C |
| Relative humidity | Max. 90% RH, non-condensing at 40 °C |
Applications
- Remote electricity meter reading
- Remote water meter reading
- Remote gas meter reading
- Energy meter data collection
- Wired M-Bus retrofit installations
- Building and utility metering
- Remote reading of compatible industrial PLCs
Installation and connection
Mount the gateway on a DIN rail and connect the required 24 VDC or 230 VAC supply to the correct terminals. Connect up to five compatible Wired M-Bus devices to the M-Bus terminals and configure the LoRaWAN connection and required reporting interval. A compatible LoRaWAN gateway and network server are required for remote data collection. Installation should be carried out by qualified personnel according to the installation instructions and applicable electrical safety requirements.
Yderligere information
| Manufacturer |
|---|
